Call Rangecraft for more information.
Call Us At: 1-877-RC HOODS
Terms: 50% at Start of Project (non refundable).
50% plus Crating & Shipping Costs before the Range Hood Ships
RangeCraft Manufacturing warrants to the original purchase of a range hood manufactured by RangeCraft Mfg., that it is free from defects in material and workmanship, for a period of twelve (12) months from the date of Invoice.
RangeCraft Manufacturing warrants the internal fans, only if installed by RangeCraft Mfg., to the original purchaser for three (3) years from the date of Invoice.
RangeCraft Manufacturing warrants the patented Micro Baffle Filters to the original purchaser of the range hood for life.
This warranty does not cover:
THIS WARRANTY APPLIES ONLY TO PRODUCTS INSTALLED FOR TYPICAL RESIDENTIAL USE.
RangeCraft Lights, Filters, Fans, and Switches
Every made-to-order RangeCraft Hood comes standard with Lights, Filters, Fans and Switches.
The lights are Halogen and produce the brightest light for you to control your meals in the pots and pans.
Recently, RangeCraft developed new and improved filters. They are made of all Stainless Steel and set into a stainless steel frame so that they can never clog up and can easily be cleaned in the dishwasher.
The main features of the new development are:
The new filters are standard with every RangeCraft Hood.
For years RangeCraft fans have set industry standards for their low noise level. Motor noise well below 55 dB at full 600 cfm means that the fans are very quiet.
In a multiple fan installation the RangeCraft Hood can have an installed power of e.g. 2700 cfm, nearly double the amount of the most commonly used external fans at a much lower noise level..
(For exhaust volumes of more than 1200 cfm make-up air should be part of the airflow planning. RangeCraft will provide different configurations of make-up air in their hoods).
Standard switches for the lights are on/off. Dimmers are available at an extra cost. For the fans a 2 speed system (low/high) is standard. An optional 3 speed (low/medium/high) switch is available at an extra cost.
Custom Cooper”Submarine”Hood in Hammered Copper
72 Inches Wide x 30 Inches Deep x 41 Inches High.
Miami with extended base in Blackened Steel with Non Directional Stainless Steel Trim.
48 inches wide x 24 inches deep x 54 inches high.
Matching backsplash Available.
$9,000. with Backsplash, $8,000. without Backsplash
Canterbury Powder Coated Blue with Mirrored Bands and Trim.
42 inches x 24″ Deep x 36 inches High.
30” wide x 24” deep x 15” tall
600 cfm internal fan
Call for pricing!
Wall Mounted Canterbury in Hammered Stainless Steel with Non Directional Stainless bands and trims.
48″ x 24″ (12″) x 24″
1200 CFM Included ~ Top 10″ round duct
Sale Price $3150
Wall Mounted Custom Cone Hood
36″ x 24″ x 42″ Duct Free
600 CFM Fan Included
Powder Coated Black with Red Powder Coated Buttons on Brushed Stainless Bottom Trim
Sale Price $500
Powder Coated Quilted Backsplash with Swarovski Crystal Accents
42″ x 24″
Sale Price $2500
Wall Mounted Universal Insert & Liner for a Fabuwood RHA 483018 UVWM 4015-S6 Includes 600 CFM fan ~ Top Vented This unit can also be purchased as a standard Universal Insert
List Price $1150
Sale Price $800